I mentioned in the last podcast that I would blog about the new method of recording used in the last podcast. Instead of the Roland R-09HR, I used a balanced pair of Rode NT5’s with the Apogee Duet as an audio interface. The results were pretty surprising. Normally the EQ I use will have massive peaks and valleys throughout, but with the NT5’s, very little EQ or anything else for that matter was needed.

This is a good shot from the front. You can see the XY pattern used.

NT5_XY_Pattern

This shows the XY pattern from the back, and the placement inside the piano. I actually used Westone in-ear monitors, which completely block out any sound and listened to what the mics picked up using various positions over the piano strings and soundboard. This is what I came up with.

XY_Pattern_Back

Here’s the MacBook Pro running Logic Studio 9 with the Apogee Duet ready to go. This thing is so quiet!

MBPro&Apogee_Duet

A shot of the whole setup.

NT5_Full_view

Because of Thanksgiving weekend, I’ll be taking this week off from the podcast to spend some time with the family. Next Saturday, Soundwave is going to record one of our new songs here at the Maestro Music studio, but I’ll try to get another podcast recorded next Sunday after church. Happy Thanksgiving!